This circuit is intended to show a general solution for implementation a low cost ADC and a 2-way multiplexed LCD using COP840C 8-bit microcontroller. The implementation is demonstrated by means of a digital personal scale. Details and function of the weight sensor itself are not covered in this article. Also the algorithms used to calculate [...]
strobe+light+generator+using+uc
Led Matrix With AT90S2313 Microcontroller Circuit LED ball physically assembled in a matrix of dimension 20 Rays and 7 LEDs. LEDs are governed microcontroller and two decoder K155ID10. Operating current 80mA decoders, this is enough to connect the LED matrix in the dynamics of directly between the microcontroller and decoders, excluding transistors, the brightness of [...]
This circuit is auto fan or cooling fan for your computer,electronic project,the circuit is simply to apply to your project . Couple Notes: Auto Fan and Cooling Circuit Th1, the 50K thermistor is a standard type. I was looking for a bar or rectangular thingy. Available from Tandy / Radio Shack. Almost any type will [...]
This 6V6 amp was built following the push-pull (PP) EL84 / 6V6 Dynaco A-410 output transformer schematic. There are a few minor deviations from the original schematics. Instead of Dynaco transformers, Hammond 1608A audio output transformers and a Hammond 272HX power transformer were used. The EL84 / 6V6 PP Dynaco A-410 output transformer schematic showed [...]
Short notes about Circuit troubleshooting. – Check the circuit for mechanical failures, like disconnected wire, broken vias on the board, and connections between two adjacent vias which are not to be connected. – You should compare values of components and their connections with values and connections between components on the schematic. – Measuring DC voltages [...]
